Speed
Choose the speed for disc burning.
Note: 1X = 150 KB/s for CD.
Finalise the disc
Check this option to close the disc in the drive. Once a disc has been finalised, you can no longer burn data to the disc even if there is free space available.
Perform the test write
This will simulate the burning activity on the drive, except the disc will remain unwritten. You may use this option to do a test before beginning the actual burning.
Note: This option is not supported by all drives.
Detect optimal speed set
Check this option to detect the optimal burning speed set for the drive.
File system
Choose the file system on the disc to be burned.
Joliet (Multilanguage support) - the length of a file/folder name can be up to 107 characters including the extension.
ISO level 1 - the maximum length of a file/folder name will be limited to 12 characters including the extension.
ISO level 2 - the maximum length of a file/folder name will be limited to 32 characters including the extension.
Disc label
Enter a label for the disc.
Burn Now
Start the actual disc burning/recording.
Advanced
Show the advanced drive options. Normally you are not recommended to change these settings.
Cancel
Cancel the disc burning and close the window.